Header height control on 2366

[Brian Griffith]

What I have is an old Case IH 2366 combine with a 2208 corn head that has 3 sensors, but the combine never had header height attachment since. I'd like to get it working this year. But then it feels like the connections don't really match up? Have you guys adapted this setup before without lateral tilt? Thanks in advance.

 

[donttrustme]

What I have is an old Case IH 2366 combine with a 2208 corn head that has 3 sensors, but the combine never had header height attachment since. I'd like to get it working this year. But then it feels like the connections don't really match up? Have you guys adapted this setup before without lateral tilt? Thanks in advance.

You can run the header height control without the lateral tilt function but the missing link for the connection mismatch is almost always the main wiring harness from the cab to the feeder house. Before you try to reinvent the wheel, I would look into a full conversion kit, but does your combine already have the Field Tracker valve block installed on it?

 

[engine&earth]

To get your 2366 or 2208 head working, you'll need a header height control module. The wiring might need a bit of tweaking since your combine wasn't originally set up for it. Your local Case IH dealer should have a retrofit kit with all the right connectors. If you're not using lateral tilt, you can just hook up the height sensors. It's easier than setting up full auto header control