Pump brand or model for spreader drive?

[min min]

Does anyone happen to know what pump brand and model Case IH used for the spreader drive on these rigs? I've been trying to track it down without much luck, the parts diagrams I've come across aren't very clear, and I'd rather not order something blind and find out it's the wrong spec.

 

[middlesworth_80]

I had the same problem last season helping a neighbor with his Case IH Titan 3540. The diagrams weren't clear, but we found the spreader drive pump was a Hypro hydraulic type. I've also heard some use Parker or Eaton, depending on the year. If you have the serial number, a dealer can usually figure it out quick. What model do you have?

 

[Sigurd_Hardcourt]

Your best bet is to pull the pump and check the tag/plate directly. Case manuals aren't always clear, but most of those rigs had common off-the-shelf hydraulic pumps you can match at a local shop instead of paying OEM markup.

 

[FarmerFred]

Does anyone happen to know what pump brand and model Case IH used for the spreader drive on these rigs? I've been trying to track it down without much luck, the parts diagrams I've come across aren't very clear, and I'd rather not order something blind and find out it's the wrong spec.

Those spreader drives usually run a Sauer-Danfoss pump. I think it's a Series 90 variable displacement pump, but the specific model number will depend on the machine's exact configuration. @Sigurd_Hardcourt is right about looking for a tag on the pump itself to confirm. It's usually a small metal plate riveted to the housing with the model and serial number stamped on it. That's the best way to get the exact part without guessing.